New Delivery for Jzq 200 – up to 880Nm worm gearbox <2000rpm speed reducer small electric motors for Conveyor – Devo Gear
New Delivery For Jzq 200 - Up To 880Nm Worm Gearbox <2000rpm Speed Reducer Small Electric Motors For Conveyor - Devo Gear | Jiangsu Devo Gear Detail:
- Place of Origin:
-
Jiangsu, China (Mainland)
- Brand Name:
-
DEVO
- Gearing Arrangement:
-
Spur
- Output Torque:
-
27 ~ 63.5 KN.m
- Input Speed:
-
600 ~ 1500 rpm
- Output Speed:
-
12 ~ 810 rpm
- Housing material:
-
Cast iron
- Gear material:
-
45 # Steel
- Gear arrangement:
-
Spur
- Application:
-
construction
- Quality control system:
-
ISO 9001
- Warranty:
-
1 Year
- Color:
-
Red, Green or customized
- Packing:
-
Wooden box
- Certification:
-
ISO9001
- Mounting type:
-
Foot-mouted
Packaging & Delivery
- Selling Units:
- Single item
- Single package size:
- 133X52X75 cm
- Single gross weight:
- 50.0 kg
- Lead Time :
-
Quantity(Piece) 1 – 10 >10 Est. Time(days) 15 To be negotiated
Introduction of products
Compared with other models of gearboxs, the (J)ZQ Series owns the features of small measurement, huge capacity of load, high efficiency and low volume of noise. Being used in heavy industrial machines, the products are excellent in reducing output speed and amplifying output torque. In the stage of operation, the products will show the feature of reliable stability which originates from the gears with the production processing of caburization and quenching.
Parameter table of (J)ZQ
Dimension figure and table of (J)ZQ series products
Use and maintenance
(1) The lubricating oil should be filled into the oil tank of the housing which is between the two oil screws; when the
filling is finished, the reductor could run with load upon the only condition that the stability of operating is confirmed
after the equipment runs without load for a while.
(2) The suitable brand of the lubricating oil: 150 # industrial gear oil being used in the summer 120 # industrial gear oil
being used in the winter; if the industry gear oil above are in lack of, both the 50# gear oil in summer and the 40# gear
oil in winter can be used instead.
(3) The inside of the reductor should be washed once at least within the first six months after it being used and then
the lubricating oil should be refilled.
(4) The reductor under the circumstance of normal operation should be maintained regularly. According to the
operating conditions and concrete situations, a thorough maintenance should be implemented every 6 to 12 month.
Below come the details of the maintenance: Open the cover board of the peephole, then check the state of friction of
every gear. The lubricating oil should be checked carefully, if the emulsification of the lubricating oil is being
discovered, the whole emulsion oil must be drained out and the gears should be washed by light oil, finally refill the
housing the new oil.
If the reductor doesn’t restore to work right away, then the oil extractor has to operate 10 minutes at least which
assurances the lubricating film being originated on the surface of gears and bearings of the reductor.
(5) If the bearings are lubricated with the grease, the type ZL-3 should be used in the summer and the ZL-2 lithium grease should be used in the winter, the grease should be refilled every six month.
Product detail pictures:
Related Product Guide:
Cooperation
Government approves Motor Bill; steep penalties for traffic offences proposed | Worm Reducer
We keep on with the theory of "quality first, provider initially, constant improvement and innovation to meet the customers" with the management and "zero defect, zero complaints" as the standard objective. To great our company, we deliver the merchandise using the fantastic excellent at the reasonable price for New Delivery For Jzq 200 - Up To 880Nm Worm Gearbox <2000rpm Speed Reducer Small Electric Motors For Conveyor - Devo Gear | Jiangsu Devo Gear , The product will supply to all over the world, such as: Portland, Jakarta, UK, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
By Edwina from Cyprus - 2015.02.04 14:13
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Rosalind from Greece - 2016.12.19 11:10